Step 6: Manage The Airbridge And Wifi Network - NETGEAR AirBridge WBC502 Hardware Installation Manual

Insight Instant AirBridge WBC502 Hardware Installation Guide
2. Insert the strap through the opening on the back of the AirBridge.
The opening is located between the holes on the back panel of the AirBridge.
3. With the strap still open, wrap the strap with the attached AirBridge around the pole.
4. Close the strap but do not tighten it.
5. Move the strap with the AirBridge attached to its permanent position.
Make sure that the front panel of the AirBridge faces the front panel of the AirBridge
at the main site.
6. Using the screwdriver, tighten the screw to secure the strap and AirBridge to the
pole.
Step 6: Manage the AirBridge and WiFi
network
After you complete the initial log-in procedure, you can configure the AirBridge using
the local browser UI. After you complete the initial log-in procedure, you can also change
the management mode so that you configure the AirBridge in a master-satellite setup
using the Insight app, or if you are an Insight Premium or Insight Pro subscriber, the
Insight Cloud portal.
For more information about managing the AirBridge using the local browser UI, see
the user manual, which you can download from netgear.com/support/download/.
For more information about NETGEAR Insight, visit netgear.com/insight and see the
NETGEAR knowledge base articles at netgear.com/support.
Installation 42 Hardware Installation Guide