Safety Instructions And Warnings - NETGEAR AirBridge WBC502 Hardware Installation Manual

Insight Instant AirBridge WBC502 Hardware Installation Guide
• AutoSensing, autonegotiating capabilities, and Auto Uplink technology for the LAN2
Ethernet port.
(For more information, see Bottom panel with Ethernet ports on page 15 and RJ-45
ports for 10/100/1000M BASE-T Ethernet connectivity on page 17.)

Safety instructions and warnings

Note: This device must be professionally installed. It is the installer's responsibility to
follow local country regulations, including operations within legal frequency channels,
output power, and DFS requirements. The vendor, reseller, or distributor is not
responsible for illegal wireless operations. For more details, see the device's terms and
conditions.
Use the following safety guidelines to ensure your own personal safety and to help
protect your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions:
• This product is designed for outdoor use but can be used indoors too. However,
the power adapter must be installed indoors. For more information, see the
environmental specifications in the user manual or the data sheet.
• Power the product only with an Ethernet cable that is connected from the LAN1 port
to the PoE port on the supplied power adapter. Do not use any other power source
such as a PoE switch. The LAN1 port is not a standard PoE port. Using any other
power source could damage the device.
• Do not service the product except as explained in your system documentation. Some
devices should never be opened.
• If any of the following conditions occur, unplug the product from the electrical outlet
and replace the part or contact your trained service provider:
- Depending on your device, the power adapter, power adapter cable, power
cable, extension cable, or plug is damaged.
- An object fell into the product.
- The product was dropped or damaged.
- The product does not operate correctly when you follow the operating
instructions.
• Do not push any objects into the openings of your system. Doing so can cause fire
or electric shock by shorting out interior components.
• Use the product only with approved equipment.
Introduction 8 Hardware Installation Guide