Oem Scan Engine Models; Connect The Development N3680 Scan Engine To A Pc; Connect With Usb - Honeywell N3680 User Manual

•

OEM Scan Engine Models

There are three models of the OEM scan engine, which may be used with the inter-
faces described in this manual. Refer to the chart below to determine the models
that can be used with your interface.
Models
N3680SR-W1-TTL
N3680SR-W1-USB
CF3680

Connect the Development N3680 Scan Engine to a PC

The development OEM scan engine can connect to a PC for evaluation.

Connect with USB

Note: The N3680XX-XX-USB scan engine will only communicate USB through the 10 pin
modular connector.
Note: The default interface is USB Keyboard (PC). If you change to USB Serial, you will need
to install the USB driver. See
2
Save the shipping container for later storage or shipping.
a. Turn off power to the terminal/computer.
b. If using full-speed USB, connect the USB interface cable to the interface
board and to the matching USB port on the computer.
c. Verify the scan engine operation by scanning a bar code from the
Symbols in the back of this manual. The scan engine beeps once when a bar
code is successfully decoded.
Interface
TTL Level 232
Full-Speed USB
Full-Speed USB
"USB Serial" on page 2-8.
N3680 Decoded Engine User Guide
Decoding Capability
Linear, 2D, postal
Linear, 2D, postal
Linear, 2D, postal
Sample