Honeywell N3680 User Manual page 152

P - Protocol
Used for shipping an image. Protocol covers two features of the image data being
sent to the host. It addresses the protocol used to send the data (Hmodem, which is
an Xmodem 1K variant that has additional header information), and the format of
the image data that is sent.
0P
2P
3P
4P
S - Pixel Ship
Pixel Ship sizes an image in proportion to its original size. It decimates the image
by shipping only certain, regularly spaced pixels. For example, 4S would transmit
every fourth pixel from every fourth line. The smaller number of pixels shipped, the
smaller the image, however, after a certain point the image becomes unusable.
1S
2S
3S
Example:
U - Document Image Filter
Allows you to input parameters to sharpen the edges and smooth the area between
the edges of text in an image. This filter should be used with gamma correction
(see
command:
IMGSNP1P0L168W90%32D
136
None (raw data)
None (default for USB)
Hmodem compressed (default for RS232)
Hmodem
Ship every pixel (default)
Ship every 2nd pixel, both horizontally and vertically
Ship every 3rd pixel, both horizontally and vertically
Pixel Ship set to 1S:
page 134), with the scan engine in a stand, and the image captured using the
Pixel Ship set Pixel Ship set to
to 2S: 3S:
N3680 Decoded Engine User Guide