GS1-128 Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-80. Minimum Default = 1, Maximum Default = 80.
Minimum Message Length
UPC-A
<Default All UPC-A Settings>
UPC-A On/Off
Note: To convert UPC-A bar codes to EAN-13, see
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
92
(page 76) for additional information. Minimum and Maximum lengths
* On
* On
Maximum Message Length
Convert UPC-A to EAN-13
N3680 Decoded Engine User Guide
Message Length
Off
on page 98.
Off