Honeywell N3680 User Manual page 82

44
0D
The data is output as:
1234567890ABC
<CR>
E9—Send all but the last characters
Include in the output message all but the last "nn" characters, starting from the
current cursor position. The cursor is moved forward to one position past the last
input message character included. Syntax = E9nn where nn stands for the numeric
value (00-99) for the number of characters that will not be sent at the end of the
message.
F4—Insert a character multiple times
Send "xx" character "nn" times in the output message, leaving the cursor in the cur-
rent position. Syntax = F4xxnn where xx stands for the insert character's hex value
for its ASCII code, and nn is the numeric value (00-99) for the number of times it
should be sent. Refer to the
on page 174 for decimal, hex and character codes.
Example: Send all but the last characters, followed by 2 tabs (E9 and F4)
Send all characters except for the last 8 from the bar code above, followed by 2
tabs.
Command string: E908F40902
E9
08
F4
09
02
The data is output as: 1234567890AB <tab><tab>
66
Hex value for a 'D"
Hex value for a CR
ASCII Conversion Chart (Code Page 1252),
"Send all but the last characters" command
Number of characters at the end to ignore
"Insert a character multiple times" command
Hex value for a horizontal tab
Number of times the tab character is sent
N3680 Decoded Engine User Guide
beginning