Table of Contents
Advertisement
TITLE
CN70 Service Work Instructions
Scan Bracket Assembly
OPERATION:
The scan bracket assembly hosts the main unit speakers and scan handle sensor. It also provides the platform to
which is attached the EA30 scan engine, camera, WAN/WiFi antenna, and side scan PCB's. Servicing this assembly
will generally require that it be removed from the CN70A. It will also need to be removed and then re-installed when
servicing other assemblies such as the WAN radio or the main logic board as these are both located under the scan
bracket assembly. The CN70A & CN70E use the same scan bracket assembly parts.
Any failure of the bracket itself, the speakers, the speaker gaskets, the scan handle sensor, or the harness that
connects the speakers and sensor to the main logic board will require that the base scan bracket assembly be replaced.
The base scan bracket assembly contains these items already factory installed. The EA30 scan engine, camera,
WAN/WiFi antenna, and side scan PCB's can be individually replaced. Refer to other operations in these service
work instructions related specifically to those items.
Tools Required
Description
T10 Torx driver
T7 Torx driver
Parts Required
Item Part Number
1
715-574S-001
2
800-573-001
3
715-628S-001
1
Continued on next page...
Description
EA30 SCAN BRACKET CN70,CK70,SPARE
SCREW 2-56X0.1875 PH TORX W/NYL CRES ROHS
Bracket,Scan Assy Spare CN70 (Used on Southwest Airlines CN70A)
2
Model
DOCUMENT NO.
CN70A,CN70E
SWICN70-000
Part Number
3
PAGE
Page 17 of 45
Qty
1
4
1
Advertisement
Table of Contents
