Screws & Torque Settings - Honeywell CN70 Series Service Work Instructions

TITLE
CN70 Service Work Instructions
Screws & Torque Settings
OPERATION:
800-570-002
800-573-001
655-199-001
655-199-002
800-569-001
800-566-001
800-450-001
800-450-003
800-577-002
800-464-001
800-481-001
SCREW 4-40X1/2 PH TORX W/NYL CRES
ROHS
Main case screws x8 for CN70A
Main case screws x10 for CN70E
SCREW 2-56X0.1875 PH TORX W/NYL CRES
ROH
Attaches scan engine bracket to frame x4
Screw,2-56,torxdrive head,custom CK/N7x
Screw,2-56,torx drive,wafer head,custom
-001 attaches MLB to frame x4
-002 attaches touch panel to magnesium frame x2
SCREW 2-56X3/16 FH TORX W/NYL CRES
ROHS
attaches keyboard PCB to frame x4
Attaches battery board to frame x4
Custom Screw, #2-56x3.4mm Wafer Hd, RoHS
Attaches shield/heat sink over WAN radio slot x2
Thd Form Screw, M1.7 x 4mm Flat Hd RoHS
Thd Forming Screw, M1.7 x 3mm FH RoHS
4mm attaches EA30 scan engine to scan bracket x2
3mm attaches side scan PCBs to scan bracket x2
each
SCREW,M1.4x0.45x3mm,TAPPING,PH PD,RoHS
secures camera and no camera option clip on WAN
units
Screw, 2-56 x3/16 PH Blk Zn w/Nylon RoHS
Secures media card door x2 on CN70,CN70e
Screw, 2-28x3/16 Plastite, Flat Hd, RoHS
Secures WAN antenna to scan engine bracket x3
Model DOCUMENT NO.
CN70A,CN70E SWICN70-000
6.0 +/- 0.2 in-lb
T10 Torx
2.5 +/- 0.2 in-lb
T7 Torx
2.5 +/- 0.2 in-lb
T7 Torx
2.5 +/- 0.2 in-lb
T7 Torx
1.5 +/- 0.2 in-lb
#0 Phillips
1.2 +/- 0.2 in-lb
#0 Phillips
1.2 +/-0.2 in-lb
#0 Phillips
3.5 +/-0.2 in-lb
#1 Phillips
2.5 +/- 0.2 in-lb
#1 Phillips
PAGE
Page 45 of 45