Table of Contents
Advertisement
TITLE
CN70 Service Work Instructions
1
Removal
1. Remove the bottom housing assembly (refer to Bottom Housing operation).
2. Remove the core assembly from the top housing (refer to Core Assembly operation).
3. Using a #1 Phillips screwdriver remove two screws (one on each side) that attach the display assembly to the core
assembly.
Continued on next page...
4. Carefully lift the display assembly away from the core assembly and disconnect the LCD flex cable and touch
panel flex cable from the main logic board. Be careful with flex connectors on the main logic board as they are very
fragile.
2
3
LCD flex
cable
Model
DOCUMENT NO.
CN70A,CN70E
SWICN70-000
Touch panel
flex cable
PAGE
Page 26 of 45
Advertisement
Table of Contents
