Blowing Feature - RIDGID WD1685AU0 Owner's Manual

Operation (continued)
Moving the Wet/Dry Vac
Should it become necessary to pick the
Vac up to move it, the handles on the
sides of the dust drum are used to lift. To
manœver the Vac, the handle above the
inlet can be used.

Blowing Feature

Your Wet/Dry Vac has a "detachable
blower." It has the capability to be used
as a dedicated blower for removing dust
and debris from floors, tools, and work
surfaces.
WARNING: Always wear safety
goggles before using as a blower.
WARNING: To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
1. Familiarise yourself with the detachable
blower portion of your Wet/Dry Vac.
2. Remove the detachable blower of
your Vac by pressing down on the
detachable blower latch under the
handle of the detachable blower and lift
by the handle to remove.
Detachable
Blower
Latch
10
Detachable
Blower Handle
Detachable
Blower
Molded
Leads