Siemens SINUMERIK 840DE sl Commissioning Manual page 521

"Easy" input in cycle support
You can influence the number of visible input parameters via MD52210
$MCS_FUNCTION_MASK_DISP with bit 9:
● All input parameters are displayed with the default setting bit 9 = 0 for "Complete".
● With the setting bit 9 = 1, you can select "Complete" or "Easy" input parameters in the cycle
support.
If you select the "Easy" input screen for input of the parameters, the values from the following
setting data are used for the invisible parameters (can be adapted machine-specifically):
SD55300 $SCS_EASY_SAFETY_CLEARANCE
= 1
SD55301 $SCS_EASY_DWELL_TIME
= 0.6
SD55305 $SCS_EASY_DRILL_DEEP_FD1
= 90
SD55306 $SCS_EASY_DRILL_DEEP_DF
= 90
SD55307 $SCS_EASY_DRILL_DEEP_V1
= 1.2
SD55308 $SCS_EASY_DRILL_DEEP_V2
= 1.4
SD55309 $SCS_EASY_THREAD_RETURN_DIST
= 2
Note
The specified default values are valid for the metric system and are converted by the NC
automatically on the machine with the inch setting.
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
mm
s
%
%
mm
mm
mm
21.1 Activating turning/milling/drilling/grinding technologies
Easy input: Safety clearance
Easy input: Dwell time
Easy input: Percentage of 1st deep-hole drill‐
ing feedrate
Easy input: Percentage of deep-hole drilling
infeed
Easy input: Min. deep-hole drilling depth infeed
Easy input: Deep-hole drilling retraction dis‐
tance
Easy input: Thread turning return distance
Technologies and cycles
507