Siemens SINUMERIK 840DE sl Commissioning Manual page 518

Technologies and cycles
21.1 Activating turning/milling/drilling/grinding technologies
Adapting the user interface
The softkey display for the selection of the cycle support in the program editor is set using the
following channel-specific configuration machine data:
MD52200 $MCS_TECHNOLOGY
= 1
= 2
= 3
= 4
References: Grinding
For further information about the grinding technology, please refer to:
● Chapter "Grinding (Page 555)"
● Operating Manual, Grinding
● Programming Manual, Production Planning; Chapter "Programming cycles externally" >
"Technological cycles":
– CYCLE495 - form-truing
– CYCLE4071 - CYCLE4074: Longitudinal grinding cycles
– CYCLE4075 - CYCLE4079: Surface grinding cycles
● Function Manual, Extended Functions; Compensations (K3),
Section: "Interpolatory compensation" > "Cylinder error compensation"
Configuring the screen display
The screen display can be configured using the following channel-specific machine data:
MD52210 $MCS_FUNCTION_MASK_DISP
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
504
Setting for turning
Setting for milling
Setting for the cylindrical grinding technology
Setting for the surface grinding technology
Dimension system for programs always in the basic system
Front view when turning in the school coordinate system
Hide "T,S,M" softkey in the JOG area
Generate end of program automatically in MDI (with "Delete blocks" softkey)
Display follow-on tool in the T,F,S window
Hide "MCS " softkey
Hide tool radius/diameter in the T,F,S window
Hide tool lengths in the T,F,S window
Hide tool icon in the T,F,S window
Display "Easy" input selection, see Section ""Easy" input in cycle support"
Do not offer channel in job lists
For WCS, activate the display of the logical spindles
Hide mold making view for G code
Technology
Function screen display
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)