Siemens SINUMERIK 840DE sl Commissioning Manual page 214

Tool management
12.2 Configuring the user interface
A brief description of the parameter (ShortText) then appears in the window with the value
itself beside it. Configuring list parameters (Page 191).
If another description text is required in the "More Data" window, a text can also be entered in
a row or column. In the window, the width of the text is made to conform to that of the brief
description and value of a parameter.
Any number of rows and columns can be created. A scrollbar appears when the window
reaches a certain size.
Entries
TOOLTYPE_XXX
ROWX_COLY
Item
TOOLTYPE_ALL_XXX
WITHOUT_MORE_DA‐
TA
Example 1
<MOREDATACONFIGURATION>
</MOREDATACONFIGURATION>
200
Meaning
Number of the tool type.
See example: Tool type 111 = Ball end mill (tapered die-sinking cutter).
Particular rowX_columnY.
If there is no entry after rowX and columnY, this field remains blank.
See example: In the "More Data" window, the first row is blank.
The following entries are possible:
● Parameter identifier
● Text
See example:
The header "Corner radius" appears in the second row of the window.
The text "Radius" and an input field for the value appear in the third row of
the window.
The fourth row is blank.
The setting applies to all tool types of a group. XXX stands for the group
number of the tool types. The hundreds position is used as the group num‐
ber, for example, TOOLTYPE_ALL_100 or TOOLTYPE_ALL_200 etc. (see
example).
Tool types of a tool group for which no "further data" are to be displayed can
be excluded with this identifier (see example).
<TOOLTYPE_111>
<ROW1_COL1>
</ROW1_COL1>
<ROW2_COL1>
<Item value="TM_DGL_CORNER_RADIUS" type="QString" />
</ROW2_COL1>
<ROW3_COL1>
<Item value="GeoCornerRadius" type="QString" />
</ROW3_COL1>
<ROW4_COL2>
</ROW4_COL2>
</TOOLTYPE_111>
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)