Siemens SINUMERIK 840DE sl Commissioning Manual page 279

3. Now open the "slaesvcconf.xml" configuration file.
4. Enter the respective NC channel in the <Connections> tag. Only use the XML tags from
the following table to specify the NC channel.
NC chan‐
nel
1
2
3
4
5
6
7
8
9
10
Example
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Configuration of the Solutionline Alarm & Event Service Adapter
-->
<CONFIGURATION>
</CONFIGURATION>
Restart SINUMERIK Operate
The files must still be converted into a binary format so that the alarm texts can be displayed
during the program runtime. This data is only converted during power up.
To do this, restart SINUMERIK Operate. In the same directory where the .ts files are located,
files with the same name are created with the ".qm" file extension.
The result of the conversion is written to the "alarmtext_conversion.log" or
"oem_text_conversion.log" file. Errors that occur during the conversion, such as syntax errors
in a parameter file, are also written to the file.
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
XML tag
PartprogramMessageChannel_01
PartprogramMessageChannel_02
PartprogramMessageChannel_03
PartprogramMessageChannel_04
PartprogramMessageChannel_05
PartprogramMessageChannel_06
PartprogramMessageChannel_07
PartprogramMessageChannel_08
PartprogramMessageChannel_09
PartprogramMessageChannel_10
<Connections>
<PartprogramMessageChannel_02>
<ContextName type="QString" value="partprogmsg02"/>
</PartprogramMessageChannel_02>
</Connections>
13.2 Configuring alarm and message texts via alarm text files
ContextName
partprogmsg01
partprogmsg02
partprogmsg03
partprogmsg04
partprogmsg05
partprogmsg06
partprogmsg07
partprogmsg08
partprogmsg09
Partprogmsg10
Configuring alarms
265