Normal Mode; Single Tx Mode; Debug Mode - Honeywell 301C User Manual

Normal Mode
This is the system's normal (default) operation mode. When the sys‐
tem is in normal mode, some values can be changed without inter‐
rupting services. When a value has been changed in any of the menu
fields, the change will take effect upon returning to the main menu
screen.
Single Tx Mode
This mode allows transmitters to be analyzed one at a time. The con‐
troller polls only the selected device, which subsequently has its in‐
formation updated. This mode does not interfere with Event Evalua‐
tion functions.
Debug Mode
This mode allows complete system operation to be evaluated and
tested without affecting operations (outside of debug mode). Events
are evaluated and displayed as necessary but no action is triggered.
71