Introduction - Honeywell 301C User Manual

Introduction
The 301C controller acts as a nerve center for a gas detection net‐
work, providing continuous monitoring for up to 96 connected units
(plus 1 301ADI). Once installed and connected, the controllers allow
the user to monitor, adjust, or reconfigure an entire network of units.
Intended Use
The controller is intended to monitor an entire gas detection network
around the clock. The unit offers logging capabilities, creating log files
of all transmitter concentrations and alarms for analysis. The unit is
also equipped with grouping or zoning capabilities that allow users to
query and monitor specific groups of transmitters or specific transmit‐
ter zones.
Receiving and Unpacking
Upon receiving the controller unit:
Check that the package is undamaged
•
Carefully open the package.
•
Locate the packing slip or purchase order and verify that all items on
•
the order are present and undamaged
Note: If the package or any of its contents are damaged, please refer
to the Warranty section at the back of the manual for instructions.
9