Ident Menu - Honeywell 301C User Manual

Ident Menu
The Ident, or identification menu allows a component's network ID to
be consulted:
The upper right corner of the screen shows the component's address.
If the address of the device whose information must be viewed is
known:

Use the arrows to move the cursor arrow to the on‐screen ad‐
dress

Press Enter (the value can be edited while the number is flashing)

Use the up or down arrows to increase or decrease the value

Press Enter again to validate the entry and display the information
for the desired device.
The bottom left corner of the display shows the transmitter name
(ex.: 301D2 ‐ product name) and the sensor type (ex.: CH4 ‐ methane
sensor). These values can also be changed for Group or Vulbus prod‐
uct types. The procedure is identical for both fields:
Programming or changing a product or sensor type

Use the arrows to move the cursor to the product type field.

Press Enter to select the field (the value can be modified when
flashing)

Use the arrows to scroll through the list of product types and
press Enter when the desired product or sensor appears
26