Com Menu - Honeywell 301C User Manual

COM Menu
This screen displays the selected communication protocol for device
addresses from 1 to 96. Each transmitter's protocol is defined by the
controller (see Network Auto‐configuration section)
If a transmitter is compatible with several different protocols, it can
be modified using to one of the following options:

Vulbus

Mdbs ASCII 7D 2S NP 9600 bauds

Mdbs RTU 8D 2S NP 9600 bauds

Mdbs RTU 8D 1S NP 9600 bauds

Mdbs RTU 8D 1S OP 9600 bauds
When a transmitter is configured with the Modbus communication
protocol, the transmitters automatically sends the programmable pa‐
rameters to the controller.
Note: Vulbus transmitter parameters must be programmed manually.
28