Decode Upc/Ean/Jan Supplementals - Honeywell Marathon Programming Manual

Decode UPC/EAN/JAN Supplementals

Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2).
The following options are available:
Option
Decode UPC/EAN/JAN Only with
Supplementals
Ignore Supplementals
Autodiscriminate UPC/EAN/JAN
Supplementals
If one of the following Supplemental Mode options is selected, the bar code reader immediately transmits EAN-13 bar
codes starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the bar code
reader must decode the bar code the number of times set via
transmitting its data to confirm that there is no supplemental. The bar code reader transmits UPC/EAN bar codes that do
not have that prefix immediately.
Option
Enable 378/379 Supplemental Mode
Enable 978/979 Supplemental Mode
Enable 977 Supplemental Mode
Enable 414/419/434/439 Supplemental
Mode
Enable 491 Supplemental Mode
Enable Smart Supplemental Mode
Supplemental User-Programmable Type 1
Supplemental User-Programmable Type 1
and 2
Smart Supplemental Plus User-
Programmable 1
Smart Supplemental Plus User-
Programmable 1 and 2
Supplemental User-Programmable 1
Supplemental User-Programmable 2
Note: In order to minimize the risk of invalid data transmission, Honeywell recommends selecting whether to read or ignore
supplemental characters.
2 - 30
Result
The bar code reader only decodes UPC/EAN symbols with supplemental
characters, and ignores symbols without supplementals.
The bar code reader decodes UPC/EAN and ignores the supplemental
characters.
The bar code reader decodes UPC/EAN symbols with supplemental
characters immediately. If the symbol does not have a supplemental, the
bar code reader must decode the bar code the number of times set via
"UPC/EAN/JAN Supplemental
to confirm that there is no supplemental.
"UPC/EAN/JAN Supplemental
Result
---
If 978 Supplemental Mode is selected and the decoder is scanning
Bookland EAN bar codes, see
Bookland EAN, and select a format using
---
---
---
Applies to EAN-13 bar codes starting with any prefix listed previously.
Applies to EAN-13 bar codes starting with a 3-digit user-defined prefix.
Set this 3-digit prefix using Supplemental User-Programmable 1.
Applies to EAN-13 bar codes starting with either of two 3-digit user-
defined prefixes. Set the 3-digit prefixes using Supplemental User-
Programmable 1 and Supplemental User-Programmable 2.
Applies to EAN-13 bar codes starting with any prefix listed previously or
the user-defined prefix set using Supplemental User-Programmable 1.
Applies to EAN-13 bar codes starting with any prefix listed previously or
one of the two user-defined prefixes set using Supplemental User-
Programmable 1 and Supplemental User-Programmable 2.
Select Supplemental User-Programmable 1 to set a 3-digit prefix. Then
select the 3 digits using the
Select Supplemental User-Programmable 2 to set a second 3-digit prefix.
Then select the 3 digits using the
Redundancy" before transmitting its data
Redundancy" before
"Enable/Disable Bookland
"Bookland ISBN
Imager Keypad Number Symbols
Imager Keypad Number Symbols
EAN" to enable
Format".
.
.