Honeywell Centraline FALCON User Manual page 244

FALCON
EN2Z-0962GE51 R0715
2. In the Name column, click on the parameter you want to change.
RESULT: The Parameter Value dialog displays.
3. Click the DETAILS << button, if you want to display additional information such
as plant name, control loop name, parameter path and symbol type.
Example:
If a parameter belongs to the symbol ´boiler switch` (SWI) which is part of the
symbol ´XFM21`, which is part of the control macro ´heating circuit`, which is
subprogram of control loop ´loop 1` which controls the plant ´plant 3`, the
following is shown:
Symbol Type:
Parameter Path:
240
SWI
Heating Circuit.XFM.Sub01.Boilwer Switch
USER GUIDE