Honeywell Centraline FALCON User Manual page 160

FALCON
EN2Z-0962GE51 R0715
Here you select the datapoints to be switched. In addition, datapoint details can
be edited.
Datapoints can be switched in the following two ways:
• Standard
Just a single datapoint with its present value property can be switched. By
default, a datapoint has the present value property assigned.
• Enhanced
Multiple datapoints with their present value property can be switched
(accessible via ENHANCED button).
2. Under Plant, select plant(s) of which datapoints you want to be filtered by
clicking the BROWSE button.
3. Under Point Type, select the point type to be filtered.
NOTE: Inputs cannot be switched.
Under Point Name, specific datapoint names can be filtered by entering a
search text. Wildcards can be used for filtering. By default all datapoints will be
displayed as indicated by an asterisk. The filter function is case-sensitive.
4. To display specific datapoint names, enter the desired search text.
5. Click the GO Button to apply the filter.
RESULT: All datapoints matching the filter criteria will be displayed in the list
below.
156
USER GUIDE