Honeywell Centraline FALCON User Manual page 213

USER GUIDE
• Subnet-Node Address Domain 0
Subnet/node address of domain 0 as defined in CARE
• Subnet-Node Address Domain 1
Defaults to zero.
3. From Automatic Logout Time, select the time for logout of the web server. To
deactivate logout, enter 0. The automatic logout time is the time of inactivity
after you are automatically logged out and be redirected to the Login dialog.
NOTE: The automatic logout time applies to the controller, not to the user.
This means, that the current time set for the controller applies to all
users which are currently logged in and access the controller.
4. To save changes, click the SUBMIT button.
NOTE: You can only change communication settings if your access level is
equal to or higher than the access level defined for this action in the
User Administration.
5. To view/change modem settings, click on the Modems tab.
RESULT: Here you can select/change the dial-in and dial-out settings of the
modem.
6. Select the modem connection from the Modem Connection drop-down list box.
7. Select/change modem settings as follows:
Dial In Settings
The dial-in settings are controller related.
i. Under User Name, enter ´xwadmin`. The user name must be identical with
the password defined in the dialup settings of the remote central.
j. Under Password, enter ´xwadmin`. The password must be identical with the
password defined in the dialup settings of the remote central.
k. To change the password, click the CHANGE button.
NOTE:
209
FALCON
EN2Z-0962GE51 R0715