Honeywell Centraline FALCON User Manual page 148

FALCON
EN2Z-0962GE51 R0715
In the Parameter Name field, parameters can be filtered by their names.
19. Enter search criteria in the Parameter Path field and/or the Parameter Name
field.
The search is case-sensitive and wildcards (*) and jokers (?) can be used. The
asterisk * can only be used at the beginning or the end of the search entry. By
default, the filter shows *, displaying parameters of all icons below the current
level. If any text is entered without wildcards, software searches for the exact
match.
20. Click the GO Button to start search according to the filter criteria. All parameters
matching the filter criteria will be displayed in the datapoints list in the lower
Assignable Parameters area.
RESULT: In the Assigned Parameters list, already-assigned parameters are
displayed.
In each list, the parameter path, name, and symbol are shown.
The path of the Assignable Parameters is displayed in the Path
field. The Assignable Parameters list shows the parameter path, the
name and the symbol of each parameter.
21. To navigate upwards in the path, click on Up on Level icon
downwards, click the on the parameter path entry in the list. Note the path
display in the Path field.
22. To sort the Assignable Parameters list differently, click the BROWSE button at
the Sort by field.
23. To change the row sort order for the fast access list, use the MOVE UP and
MOVE DOWN buttons in the Assigned Parameters list.
24. To move parameters between lists, that is, to make them assigned or
assignable, do one of the following:
a. In the Assigned Parameters list or in the Assignable Parameters list, highlight
the parameters to be moved. Multiselection by using the CTRL or the SHIFT
key is possible.
b. Click the SINGLE ARROW button with desired direction.
144
USER GUIDE
. To navigate