Chapter 5: Web-Based Management
This page includes the following fields:
Object
Port:
Type:
Link:
State:
Tx Good Packet:
Tx Bad Packet:
Rx Good Packet:
Rx Bad Packet:
Tx Abort Packet:
Packet Collision:
Packet Dropped:
Rx Bcast Packet:
Rx Mcast Packet:
Port Control
In Port control you can configure the settings of each port to control the connection
parameters, and the status of each port is listed beneath.
66
Description
The port number.
Displays the current speed of connection to the port.
The status of linking—'Up' or 'Down'.
It's set by Port Control. When the state is disabled, the port will not
transmit or receive any packet.
The counts of transmitting good packets via this port.
The counts of transmitting bad packets (including undersize [less than
64 octets], oversize, CRC Align errors, fragments and jabbers packets)
via this port.
The counts of receiving good packets via this port.
The counts of receiving good packets (including undersize [less than 64
octets], oversize, CRC error, fragments and jabbers) via this port.
The aborted packet while transmitting.
The counts of collision packet.
The counts of dropped packet.
The counts of broadcast packet.
The counts of multicast packet.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual