Snmp Configuration - GE -DSH-73 User Manual

NOTE: Path cost "0" is used to indicate auto-configuration mode. When the short path
cost method is selected and the default path cost recommended by the IEEE 8021w
standard exceeds 65,535, the default is set to 65,535.
By default, the system automatically detects the speed and duplex mode used on
each port, and configures the path cost according to the values shown below.
Table 5-1: Recommended STP Path Cost Range
Port Type
Ethernet
Fast Ethernet
Gigabit Ethernet
Table 5-2: Recommended STP Path Costs
Port Type Link Type
Ethernet Half Duplex
Full Duplex
Trunk
Fast Ethernet Half Duplex
Full Duplex
Trunk
Gigabit Ethernet Full Duplex
Trunk

SNMP Configuration

Simple Network Management Protocol (SNMP) is the protocol developed to manage
nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP
enables network administrators to manage network performance, find and solve
network problems, and plan for network growth. Network management systems
learn of problems by receiving traps or change notices from network devices
implementing SNMP.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
IEEE 802.1D-1998
50-600
10-60
3-10
IEEE 802.1D-1998
100
95
90
19
18
15
4
3
Chapter 5: Web-Based Management
IEEE 802.1w-2001
200,000-20,000,000
20,000-2,000,000
2,000-200,000
IEEE 802.1w-2001
2,000,000
1,999,999
1,000,000
200,000
100,000
50,000
10,000
5,000
99