Vlan Commands Set - GE -DSH-73 User Manual

VLAN Commands Set

Commands
vlan database
Vlanmode
[portbase| 802.1q | gvrp]
no vlan
Ported based VLAN configuration
vlan port-based grpname
[Group Name]
grpid
[GroupID]
port
[PortNumbers]
show vlan [GroupID]
or
show vlan
no vlan group
[GroupID]
IEEE 802.1Q VLAN
vlan 8021q name
[GroupName]
vid
[VID]
vlan 8021q port
[PortNumber]
access-link untag
[UntaggedVID]
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Level Description
P Enter VLAN configure mode switch#vlan database
V To set switch VLAN mode.
V No VLAN
V Add new port based VALN
V Show VLAN information
V Delete port base group ID
V Change the name of VLAN
group, if the group didn't
exist, this command can't be
applied.
V Assign a access link for
VLAN by port, if the port
belong to a trunk group, this
command can't be applied.
Chapter 6: Command Sets
Example
switch(vlan)#vlanmode portbase
or
switch(vlan)#vlanmode 802.1q
or
switch(vlan)#vlanmode gvrp
Switch(vlan)#no vlan
switch(vlan)#vlan port-based
grpname test grpid 2 port 2-4
or
switch(vlan)#vlan port-based
grpname test grpid 2 port 2,3,4
switch(vlan)#show vlan 23
switch(vlan)#no vlan group 2
switch(vlan)#vlan 8021q name test
vid 22
switch(vlan)#vlan 8021q port 3
access-link untag 33
143