Fault Relay Alarm - GE -DSH-73 User Manual

Fault Relay Alarm

The Fault Relay Alarm function provides the Power Failure and Port Link Down/Broken
detection. With both power input 1 and power input 2 installed and the check boxes
of power 1/power 2 ticked, the FAULT LED indicator will then be possible to light up
when any one of the power failures occurs. As for the Port Link Down/Broken
detection, the FAULT LED indicator will light up when the port failure occurs; certainly
the check box beside the port must be ticked first. Please refer to the segment of
'Wiring the Fault Alarm Contact' for the failure detection.
Figure 5-14: Fault Relay Alarm interface
This page includes the following fields:
Object
Power Failure:
Port Link Down/Broken:
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Description
Tick the check box to enable the function of lighting up the FAULT
LED on the panel when power fails.
Tick the check box to enable the function of lighting up FAULT LED
on the panel when Ports' states are link down or broken.
Chapter 5: Web-Based Management
59