Led Indicators - GE -DSH-73 User Manual

Chapter 2: Installation

LED Indicators

The diagnostic LEDs that provide real-time information of system and optional status
are located on the front panel of the GE-DSH series. The following table provides the
description of the LED status and their meanings for the Managed Industrial Switch.
GE-DSH-82 LED Indicators
• System
LED Color
PWR Green
R.M. Green
PWR1 Green
PWR2 Green
FAULT Red
• 10/100Base-TX Ports –
LED Color
Green
Port-1 ~ Port-8
Amber
18
Status Meaning
On The switch unit is power on.
Off No power.
On The industrial switch is the master of X-Ring group.
The industrial switch is not a ring master in X-Ring
Off
group.
On Power 1 is active.
Off Power 1 is inactive.
On Power 2 is active.
Off Power 2 is inactive.
On Power or port failure.
Off No failure.
Port-1 to Port-8
Status Meaning
On A network device is detected.
The port is transmitting or receiving packets from the
Blinking
TX device.
Off No device attached.
On The port is operating in full-duplex mode.
Blinking Collision of Packets occurs.
The port is in half-duplex mode or no device is
Off
attached.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual