Advertisement
BGD0800 (LXDG01)
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature
DISASSEMBLING
(1) Remove Barrel section. (Fig. 2)
(2) Disassemble Armature. (Fig. 6)
Fig. 6
1. Remove Carbon brushes and Spacer.
Spacer
(3) Separate Armature from Gear housing cover. (Fig. 7)
Fig. 7
3. Remove Armature from Gear housing cover
by applying 1R279 to the Armature shaft,
then pressing it with arbor press.
Gear housing cover
Flat washer 22
will remain here
if it does not
fall off from
Gear housing cover
when separating
Barrel section in
the step of Fig 2.
Carbon brush
1R279
Coupling
1R350
Armature
2. Disassemble Armature section by pulling out.
4. Remove Coupling together with Ball bearing 629LLB
from Gear housing cover, then separate Coupling from
Ball bearing 629LLB by removing Retaining ring S-9.
Coupling
Ball bearing
629LLB
Flat washer 22
Gear housing cover
Armature
Turn over.
1R291
Retaining
ring S-9
Ball bearing
629LLB
Coupling
P 4/ 10
Advertisement
