Advertisement
BGD0801
R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".
[1] NECESSARY REPAIRING TOOLS
Code No.
1R005
Retaining ring pliers RT-2N
1R279
Round bar for arbor 5-50
1R291
Retaining ring S and R pliers
1R350
Ring 60
1R383
Armature positioning jig
[2] LUBRICATION
Apply lubricant as instructed in the table below.
Item No.
Description
Felt Ring 18
---
(a component part of
Bearing box complete)
Fig. 1
Bearing box complete
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature
DISASSEMBLING
(1) Remove Collet cone and Collet sleeve from Spindle.
(2) Remove Insulation cover from Bearing box complete,
then separate Bearing box complete from Housing. (Fig.2)
Fig. 2
1.Remove Insulation cover from Bearing box complete,
then remove Carbon brush.
Insulation cover
Description
removing Retaining ring R-32
removing Armature
removing Retaining ring S-15
holding Bearing box complete when removing Armature
positioning Armature at the precise position when mounting it to
Bearing box complete
Apply sufficient lubricant to protect from dust.
Bearing box complete
Portion to lubricate
Felt Ring 18
Ball Bearing 6002LLB
2. Remove Bearing box complete together with
Armature from Housing.
Bearing box
complete
Use for
Lubricant
"VG100"
4x22 Tapping screw (4 pcs)
Armature
Housing
P 6/ 10
Amount (g)
Advertisement
