Makita LXDG01 1 Series Technical Information page 3

BGD0800 (LXDG01)
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Coupling, Spindle
DISASSEMBLING
(2) Remove Coupling from Spindle, then separate Spindle from Barrel complete. (Figs. 3, 4)
Fig. 3
4. Turn Spindle counterclockwise with Wrench 13 while holding Coupling
with Hex box bit 17.
Fig. 4
6. Drive the removed Coupling in Spindle again
about 2 pitches for utilizing it as a removing tool.
Spindle Barrel complete
Ball bearing Retaining ring
6001LLB S-12
(3) Remove Retaining ring S-12 and Ball bearing 6001LLB from Spindle. (Fig. 5)
Fig. 5
Retaining
ring S-12
Ball bearing
6001LLB
Spindle
ASSEMBLING
Do the reverse of the disassembling steps.
Wrench 13
Coupling
Hex socket
bit 17
Drive Coupling
about 2 pitches
in Spindle again.
Ball bearing
629LLB
5. The Coupling disconnected from
Spindle remains in Hex box bit 17.
Spindle
7. Push Coupling by hand towards the front end of
Barrel complete, and remove Spindle together with
Ball bearing 6001LLB and Retaining ring S-12;
in this step, Ball bearing 629LLB remains in
Barrel complete.
8. Remove Ball bearing 629LLB from the rear end of
Barrel complete.
Retaining
ring S-12
P 3/ 10
Coupling
Ball bearing
6291LLB
Ball bearing
6001LLB