Advertisement
BGD0800 (LXDG01)/ BGD0801
W
iring diagram
Fig. D-4
Wiring in Housing (L)
Terminal
Flag connectors must be connected
to Terminal as below.
Lead wires from Controller to Terminal
must be routed under Controller.
Do not route them over the ribs around
Controller and Terminal.
Controller
Switch
Terminal
Flag connector
Housing (L)
Endbell complete
Lead wire holder
Lead wires from LED Light circuit
must be routed in the area surrounded
by the dotted line.
LED light
circuit
Yoke unit
Lead wire of
LED light circuit
P 10/10
Advertisement
