Advertisement
BGD0800 (LXDG01)
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature
ASSEMBLING
(1) Assemble Coupling to Ball bearing 629LLB by fitting Retaining ring S-9. (Fig. 7)
(2) Assemble Armature to Gear housing cover. (Fig. 8)
Fig. 8
1. Assemble Ball bearing 629LLB
with Coupling to Gear housing
cover, then mount them on 1R382.
Gear housing cover
Ball bearing
629LLB
Coupling
1R382
3. Mount Spacer to Coupling.
Spacer
Fig. 9
5. Assemble Armature to Housing.
2. Press Armature carefully
Coupling
4. Mount Flat washer 22.
Coupling
6. Assemble Barrel section to Housing with the square depression side
set aligned with the Switch lever side.
Barrel complete
into Coupling on 1R382
with arbor press until stopped.
Flat washer 22
Housing
Note: Press Armature into
Coupling hole as slowly turning it
so that it is set precisely at a right
angle to Coupling.
Coupling
1R382
square depression
Switch lever
P 5/ 10
Advertisement
