Taking More Than One Call; Accessing Voicemail - Cisco SPA504G Quick User Manual

Taking more than one call

You can take up to three calls on your line, if you have Call Waiting activated – check with your
system administrator. You'll know if there's a second incoming call by:
-
the second line button flashing red or
-
the over-display light flashing red or
-
a single beep from the handset.
To switch to the second call – putting the first caller on hold:

Press the flashing red line button.

Press the button again to get back to the first caller.

Accessing voicemail

If you have voicemail, the red strip light above the display will light up. To get to your messages:
-
key in your Company Voice Portal number
-
then type in your Voice Portal passcode followed by #.
Horizon | Cisco 504 IP Phone Quick User Guide
© Gamma 2016. All rights reserved. Confidential.
Page 7 of 9