HIKVISION DS-K1100 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Card Reader
  5. DS-K1100 Series
  6. User manual
HIKVISION DS-K1100 Series User Manual

HIKVISION DS-K1100 Series User Manual

Hide thumbs Also See for DS-K1100 Series:

Advertisement

Table of Contents

DS-K1100 Series Card Reader
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-K1100 Series

Summary of Contents for HIKVISION DS-K1100 Series

  • Page 1 DS-K1100 Series Card Reader User Manual...
  • Page 2 ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
  • Page 3 TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY.
  • Page 4 DS-K1100 Series Card Reader Regulatory Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 DS-K1100 Series Card Reader 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 6 DS-K1100 Series Card Reader Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Warnings Follow these Cautions Follow these precautions to safeguards prevent prevent potential injury or material serious injury or death.
  • Page 7 DS-K1100 Series Card Reader vibrations surface or places subject to shock (ignorance can cause equipment damage).  Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
  • Page 8 DS-K1100 Series Card Reader reader, you must use RVVP cable above 0.5 to connect them.  If the card reader is installed outside or in environment easy to permeable, it is advisable to install a waterproof shield.  If you need to install several card readers, the distance among them must over 30cm.

  • Page 9: Table Of Contents

    DS-K1100 Series Card Reader Content Chapter 1 Introduction ............1 Front View ..............1 Rear View ..............3 Slide View ..............5 Chapter 2 Installation ............7 Installing PSAM Card ............. 7 Introduction for DIP Switch ........... 7 Definition of Cable ............8 Wiring Cables ..............

  • Page 10: Chapter 1 Introduction

    DS-K1100 Series Card Reader Chapter 1 Introduction DS-K1100 series card reader is a kind of high-performance product, with a 32 bit high-speed processor. It communicates with access controller via either RS-485 protocol or Wiegand protocol. And a build-in tamper-proof module helps to protect card reader from malicious damage.
  • Page 11 DS-K1100 Series Card Reader The front view of DS-K1102 series card reader is shown below: Figure 1-3 DS-K1102MK/DS-K1102CK Figure 1-4 DS-K1102M/DS-K1102C The front view of DS-K1103 series card reader is shown below: Figure 1-5 DS-K1103MK/DS-K1103CK Figure 1-6 DS-K1103M/DS-K1103C...

  • Page 12: Rear View

    DS-K1100 Series Card Reader The front view of DS-K1104 series card reader is shown below: Figure 1-7 DS-K1104MK/DS-K1104CK Figure 1-8 DS-K1104M/DS-K1104C 1.2 Rear View The rear view of card reader is shown below: Figure 1-9 Rear View of DS-K1101 Series...
  • Page 13 DS-K1100 Series Card Reader Figure 1-10 Rear View of DS-K1102 Series Figure 1-11 Rear View of DS-K1103 Series...

  • Page 14: Slide View

    DS-K1100 Series Card Reader Figure 1-12 Rear View of DS-K1104 Series Table 1-1 Description of Rear View Name Cable Interface of RS-485, Power, LED Control, etc. Buzzer Tamper-proof Module DIP Switch PSAM Card Slot (available for CPU card reader) 1.3 Slide View...
  • Page 15 DS-K1100 Series Card Reader Figure 1-13 DS-K1101 Series Figure 1-14 DS-K1102 Series Figure 1-15 DS-K1103 Series Figure 1-16 DS-K1104 Series...

  • Page 16: Chapter 2 Installation

    DS-K1100 Series Card Reader Chapter 2 Installation 2.1 Installing PSAM Card PSAM card slot is only available for CPU card reader. Insert the PSAM card into the slot according to the direction shown below. Figure 2-1 PSAM Card Slot 2.2 Introduction for DIP Switch The DIP switch module is shown below.

  • Page 17: Definition Of Cable

    DS-K1100 Series Card Reader Figure 2-3 DIP Switch Module Table 2-2 Description of DIP Switch Description DIP Switch Status 1: 1 1 ~ 4 Address of RS-485 0: 0 Read card No. or file in card. 1: read card No;...

  • Page 18: Wiring Cables

    DS-K1100 Series Card Reader Color Description Purple Beep Control (available for Wiegand Protocol) Gray Case Sensor (available for Wiegand Protocol) Green Wiegand W0 (available for Wiegand Protocol) White Wiegand W1 (available for Wiegand Protocol) Black Orange Red LED Control (available for Wiegand Protocol) PWR (DC +12V) 2.4 Wiring Cables...
  • Page 19 DS-K1100 Series Card Reader Controller Card Reader Figure 2-4 Wiring for RS-485 Communication Mode Steps for Wiegand communication mode: Set the DIP switch of No. 6 as 1. Set the DIP switch of No. 5 and 7 for reading card mode and Wiegand protocol.

  • Page 20: Installing Card Reader

    DS-K1100 Series Card Reader Controller Card Reader Figure 2-5 Wiring for Wiegand Communication Mode 2.5 Installing Card Reader Before you start: Set the DIP switch. For details, refer to 2.2 Introduction for DIP Switch. Steps:...
  • Page 21 DS-K1100 Series Card Reader Fix the gang box on the wall or other place. Connect the cables between controller and card reader. For details, refer to 2.4 Wiring Cables. Push the card reader to match the fixed gang box. Fasten the screw to keep the components together.

  • Page 22: Chapter 3 Sound Prompt And Indicator

    DS-K1100 Series Card Reader Chapter 3 Sound Prompt and Indicator After the card reader is powered on, LED status indicator will turn blue and blink for 1 time. Then it will turn red and blink for 3 times. At last the buzzer will send out a beep sound indicating the starting up process is completed.
  • Page 23 DS-K1100 Series Card Reader LED Indicator Status Description card is valid. The operation of pressing keys or swiping Solid red card is invalid. For RS-485 protocol: Registering failed or card reader is offline. Failed to get key files Red and blinking of PSAM card;...
  • Page 24 DS-K1100 Series Card Reader UD05659B-A...

This manual is also suitable for:

Ds-k1101 seriesDs-k1104 seriesDs-k1101mDs-k1101mkDs-k1101cDs-k1103 series ... Show all

Table of Contents