HIKVISION DS-K1100 Series Quick Start Manual

DS-K1100 Series Card Readers Connect
Title: to DS-K2600 Series Access Controllers
by Wiegand
Product: Access Control Device
DS-K1100 Series Card Readers Connect to DS-K2600
Series Access Controllers by Wiegand
Preparation
Connecting card reader to access controller is mainly applied to swiping card to open the door for entrring
or exiting. For card reader and access controller in this documents, please check the table below:
Notice
1. Please cut off power supply before wiring;
2. DS-K1100 Series Card Readers support standard Wiegand 26/34 protocol; about Wiegand cable of
card reader, please check the table below:
3. Correspondingly, there are wiegand interfaces in DS-K2600 series access controllers;
DS-K2601
Version:
Page:
Card Reader
DS-K1101M/MK, DS-K1102M/MK,
DS-K1103M/MK, DS-K1104M/MK,
DS-K1107M/MK, DS-K1108M/MK
DS-K1102E/EK, DS-K1107E/EK,
DS-K1108E/EK
Color Description
Red Power (DC +12V)
Black GND
Green W0 (available for Wiegand Protocol)
White W1 (available for Wiegand Protocol)
Purple Beep Control (available for Wiegand Protocol)
Brown Blue/Green LED Control (available for Wiegand Protocol)
Orange Red LED Control (available for Wiegand Protocol)
Gray Tamper (available for Wiegand Protocol)
Yellow RS-485+
Blue RS-485-
DS-K2602
v1.0 Date: 6/21/2017
1 of 5
Access Controller
DS-K2601,
DS-K2602,
DS-K2604
DS-K2604