4MV488000.book 35 ページ 2016年3月2日 水曜日 午後12時36分
TRANSMISSION OIL LEVEL CHECK
Check the transmission oil level with the tiller on a level surface (see
page 29) and the engine stopped. Make sure the area around the oil
level check bolt and the oil filler cap is clean.
1. Remove the transmission oil filler cap.
2. Check the oil level is up to the lower edge of the oil filler hole.
3. If the level is low, fill with the recommended transmission oil to the
upper level (up to the lower edge of the oil filler hole).
4. Reinstall the oil filler cap securely.
OIL FILLER HOLE
TRANSMISSION OIL FILLER CAP
Maximum oil capacity: 1.0 L
Recommended oil:
API SERVICE category SE or later (or equivalent), SAE 10W-30, SAE
20W-40
Wash your hands with soap and water after handing used oil.
SERVICING YOUR TILLER
LOWER EDGE OF
UPPER LIMIT
THE OIL FILLER HOLE
35