4MV488000.book 45 ページ 2016年3月2日 水曜日 午後12時36分
SERVICING YOUR TILLER
RECOIL STARTER COVER CHECK AND CLEANING
Check
Make sure that grass, clay, mud water or other similar material is not
inside the recoil starter cover through the hole located on the side of
the cover. Clean if necessary.
Cleaning
1. Remove the recoil starter cover by removing the three bolts.
2. Remove mud, grass tips, dirt and other foreign matter from inside
the cover.
3. After cleaning, replace the cover and tighten the three bolts securely.
RECOIL STARTER COVER
BOLTS
45