Transporting; Before Loading; Loading And Unloading - Honda F300 Owner's Manual

4MV488000.book 51 ページ ２０１６年３月２日 水曜日 午後１２時３６分

TRANSPORTING

BEFORE LOADING

If the engine has been running, allow it to cool for at least 15 minutes
before loading the tiller on the transport vehicle. A hot engine and
exhaust system can burn you and can ignite some materials.
To prevent fuel spillage, drain fuel from the fuel tank (see page 48).
Always turn the engine switch to the OFF position. Make sure to turn
the fuel valve OFF.

LOADING AND UNLOADING

If a suitable loading ramp is not available, two people should lift the
tiller on and off the transport vehicle while holding the tiller level.
Position the tiller so it sits flat on the bed of the transport vehicle. Tie
the tiller down with rope or straps. Keep the tie-down rope or straps
away from the controls, adjustment levers, cables, and the carburetor.
51