4MV488000.book 39 ページ 2016年3月2日 水曜日 午後12時36分
SPARK PLUG SERVICE
Recommended spark plug: C4HSB (NGK)
An incorrect spark plug can cause engine damage.
1. Disconnect the spark plug cap, and remove any dirt from around the
spark plug area.
2. Remove the spark plug with the spark plug wrench.
SPARK PLUG WRENCH
3. Inspect the spark plug. Replace it
if the electrodes are worn, or if
the insulator is cracked or
chipped.
4. Measure the spark plug electrode
gap with a wire-type feeler gauge.
Correct the gap, if necessary, by
carefully bending the side
electrode.
The gap should be:
0.6 – 0.7 mm
5. Install the spark plug carefully, by
hand, to avoid cross-threading.
6. After the spark plug seats, tighten
with the spark plug wrench to
compress the washer.
SERVICING YOUR TILLER
0.6 – 0.7 mm
SEALING WASHER
39