SERVICING YOUR HONDATILLER
TRANSMISSION OIL LEVEL CHECK
Check the transmission oil level with the tiller on a level surface and the engine
stopped.
1. Remove the transmission oil level check bolt. The oil should be level with
the lower edge of the oil filler hole.
2. Remove the transmission oil filler cap and add the same oil as recommended
for the engine (see page 29), if the level is low.
3. Reinstall oil filler cap and tighten the oil level check bolt securely.
TRANSMISSION
OIL LEVEL CHECK BOLT
UPPER LIMIT
(Lower edge
of
, -
the oil filter hole.)
30