Camera Setup - Honeywell Galaxy TouchCenter Plus User Manual

Camera Setup

The Camera feature allows you to enrol cameras and view up to four cameras at one time using the quadrant view feature. If using existing (mounted)
cameras, go to Step 4 below. If this is a first time setup, you will need to Discover/Configure the cameras prior to mounting and then follow the steps
below.
ICON
1. Connect a Cat5/6 cable to your camera (LAN) and connect the
opposite end to an Ethernet connection on your router.
2. Apply power to the Camera. It may take a few seconds for
initial power-up of camera.
3. On the Home screen press the
code (or press the
Multimedia
icon. The Camera List
4. Press the icon to locate the camera. Once located,
Discover
highlight the camera address, and press the
Step 7 below.
5. If the camera information is not automatically obtained, press
the icon to manually enter information on the
Add
screen.
6. To edit camera information, highlight the camera name and
press the Edit icon; the
displayed.
a) To retrieve camera settings and connect to the camera, press
the
Camera Settings
b) Highlight each field to enter new information on the Data
Entry Keyboard and use the up/down arrows to change
settings.
c) Press .
Save
7. When all cameras have been added, press the
and enter the camera wireless settings from your router.
8. Press the Apply to all
If camera does not have wireless capability, leave it connected
to router.
9. Press the icon.
Save
Multi-Media (cont'd)
ACTION
Camera icon and an authorized
icon followed by the
Camera
screen is displayed.
Edit icon and go to
Add Camera
Edit Camera Settings screen is
icon, or
Camera WiFi icon
icon to set cameras to wireless operation.
23
NOTES
Initial camera setup cannot be performed over a wireless
connection.
Notes:
•
QuickTime® media player must be installed on your
computer.
•
Max. suggested camera resolution = 640 x 480.
Max. suggested frame rate = 5 fps.
•
Camera viewing is not compatible if using Opera web
browser.
IMPORTANT: Use a web browser to view cameras for non-
security purposes only. Camera streams viewed on web
browsers can stop without indication due to network connection
issues.
Use the Data Entry Keyboard to enter all required information.
•
Press the Up Arrow key to switch to capital letters
•
Press the X key to delete
•
Press the ABC/.?123/Åå key to switch between numerals
and symbols/characters.
•
Press GO to return to the "Add New Camera" screen.
Enter the appropriate wireless information for SSID, Security
Mode,
N/W type, Domain and Channel.
WARNING: Make sure the cameras are connected via Ethernet
with a Cat 5/6 cable.
On the Edit or Add Camera Settings screen, enter the
appropriate information (NAME, IP Address, RTSP, MJPEG,
MOBILE, RTSP PORT#, MODEL, USER NAME, PASSWORD,
RESOLUTION, FRAME RATE, HTTP Port#) if known.
A pop-up window displays:
For remote camera viewing service, please contact your alarm
company and ask for Total Connect™ service and provide this
camera's MAC ID ‹00c0027fcd15›. Press Continue to prepare