How To Display Faults - Honeywell Galaxy TouchCenter Plus User Manual

How to Display Faults

When a fault is present, is displayed at the top of the screen.
ALERT
In EN50131 Mode no text is displayed at the top of the screen.
Note:
To display faults, do the following:
ICON ACTION
1. On the screen, press the
Home
and then enter an authorised code.
A list of faults is displayed.
2. Take corrective action for each fault listed. You
can choose to omit any zone with a fault that
cannot be corrected in step 4.
3. Press Reset . The Security
Note: Any uncorrected faults remain on the list
after you press Reset
4. If you want to omit a zone with a fault that
cannot be corrected, follow the procedure from
step 2 in How to Omit Zones on page 14.
Show Zones Icons
Clear Omits Toggle Trouble
Omission
Security (cont'd)
icon, Examples of corrective actions are closing a window or closing a door.
Security
You can use the up and down arrows next to the faults list to scroll through
the faults.
page is displayed.
.
Distressed Zones Icons
Alarm Zone Trouble
13
NOTES
Faults Omit Zones Low Battery All