Honeywell Galaxy TouchCenter Plus User Manual page 20

Setup a WIFI (WLAN) Connection
On the IP Setup screen, add a WIFI network connection as follows:
ICON
1. On the Home screen, press the
enter an authorised code.
2. Press the IP Setup icon.
3. Press the button.
WIFI ON
4. Do one of the following:
a) Use the scroll bar to locate a network from the list of
Wi-Fi Networks to connect to and highlight that
field. If your router is not listed press the
icon.
b) If your router is not listed, even after refreshing the
list, scroll to the bottom of the list and select
. Highlight each field to enter the required
Network
information for SSID, Security Mode, and
Passphrase / Shared Key on the
and press
Keyboard
5. Press the icon. Pressing
Save
port number resets the keypad.
Setup (cont'd)
ACTION
Setup icon, and then
A pop-up window displays:
This will switch off LAN Network, do you want to continue?" Yes or
No
Use the Data Entry Keyboard to enter the required information.
•
Refresh
•
•
•
Add
Data Entry
.
Go
A pop-up window displays the message:
when changing the
Save
Success
WIFI Network Saved
20
NOTES
Press the up arrow key to switch to capital letters.
Press the Space key to add a space between characters.
Press the x key to delete/backspace.
Press the ABC/.?123/Åå key to switch between numerals and
symbols/characters.