System Information; Ip Setup And Network Connections - Honeywell Galaxy TouchCenter Plus User Manual

System Information

To view the current software/firmware version installed on your system, do the following:
ICON ACTION
1. On the Home screen, press the
then enter an authorised code.
2. Press the System Info

IP Setup and Network Connections

IP Address Setup
In most cases, IP addresses are assigned automatically (the
can be found by accessing your router. Refer to your router instructions.
Setup a LAN Connection
On the screen, add a LAN network connection as follows:
IP Setup
ICON
1. Connect an Ethernet cable between the router and the
keypad and setup any video cameras.
2. On the Home screen, press the
enter an authorised code.
3. Press the IP Setup icon.
4. Press the button.
LAN ON
5. Press the Save icon: the IP information is
automatically updated.
6. Return to the IP Setup
information is displayed.
7. If the IP address is not displayed, change the
Connection type to
the necessary IP information from your router. Press
the icon; the IP information is automatically
Save
updated.
Setup (cont'd)
The following information is displayed: MAC Address, CRC, Software version
Setup icon, and
and Firmware version.
icon.
Obtain address auto
ACTION
Setup icon, and then
A popup window displays:
This will switch off WLAN Network, do you want to continue? Yes or
No
Use the Data Entry Keyboard to enter the required information.
Press the up arrow to switch to capital letters.
screen. Check that the
•
•
Internet
•
Static , and then manually enter
•
19
NOTES
setting). However, you may require a static (fixed) IP address that
NOTES
Press the Space key to add a space between characters.
Press the x key to delete/backspace.
Press the ABC/.?123/Åå key to switch between numerals and
symbols/characters.
Press Go to return to the IP Setup screen.