Touchscreen Re-Calibration - GE QuickPanel+ IC755CxS06RDx User Manual

6.1.3

Touchscreen Re-calibration

The QuickPanel touchscreen is shipped pre-calibrated. However, if there are any issues with touchscreen
+
responsiveness, it may need to be re-calibrated.
➢ To re-calibrate the touchscreen
1. Open the QuickPanel
+
2. Select the TouchPanel tab.
3. Select Recalibrate Touch Screen.
4. Select Recalibrate Touch Sensor.
Note During IC755CxS06RDx or IC755CxW07CDx touchscreen sensor re-calibration, the user is prompted to
activate a switch located in the battery compartment. This is not applicable to any other display units.
5. Remove the battery cover and press the switch.
6. Replace the battery
cover.
Operation
For public disclosure
Setup tool.
Touchscreen Sensor Calibration Switch
Switch
Battery
Cover
GFK-2847W 91