Enable Or Disable Snmp Agent; Export Mib To Sd Card - GE QuickPanel+ IC755CxS06RDx User Manual

3.14.2

Enable or Disable SNMP Agent

SNMP communication disabled by default on the QuickPanel+ device for security purposes. To enable or disable SNMP
communication using the QuickPanel
Note Enabling or disabling SNMP communication is a one-time user configuration.
3.14.3

Export MIB to SD Card

With the SNMP Agent is enabled on the QuickPanel
QuickPanelMIB.mib file to a SD Card.
Attention
➢ To export the MIB to a SD Card
1. Insert a working SD Card into the external card slot on the QuickPanel
2. From the Start menu, select System, open the QuickPanel
3. Copy the MIB file to the SD Card.
50 GFK-2847W
For public disclosure
OS Utilities Settings tool refer to the procedure
+
device, export the QuickPanel
+
It is highly recommended that you pre-load GE MIBs (GEIP-SMI.txt and
GEIP-PRODUCTS-MIB.txt in sequence) prior to loading the QuickPanelMIB.mib file
into SNMP Managers to avoid any MIB compiler errors.
Contact technical support or download the MIBs GEIP-SMI.txt and
GEIP-PRODUCTS-MIB.txt from the
copied from the QuickPanel
Enable or Disable SNMP
Management Information Base (MIB)
+
Support Site and QuickPanelMIB.mib can be
device by performing the following procedure.
+
device.
+
Setup Tool, and select the SNMP Agent tab.
+
Click Copy MIB To SD Card.
QuickPanel⁺ Operator Interface User
Manual
Agent.