Ftp Server; Remote User Authentication; Ftp With Removable Flash Devices - GE QuickPanel+ IC755CxS06RDx User Manual

Operator interface
Hide thumbs Also See for QuickPanel+ IC755CxS06RDx:
Table of Contents

Advertisement

3.6

FTP Server

The File Transfer Protocol (FTP) server included with the QuickPanel
support Secure File Transfer Protocol (SFTP) or implicit FTPS, which uses different ports and is based on Secure Shell
(SSH) rather than Secure Sockets Layer (SSL).
The FTP server is configured with the Quick Panel
background program will run, waiting for clients to connect. Up to ten connections are supported. Sessions that are
idle for five minutes are terminated by the server.
The server supports non-secure operation. All information including username, password, and data is transmitted
with no encryption and is susceptible to packet sniffing and various FTP attacks.
Note If the server status is changed, the QuickPanel
3.6.1

Remote User Authentication

Note The FTP root directory is available from the QuickPanel
The server only supports anonymous login with password requested (but not validated). This may prevent some
types of attacks and is required by some clients. Once connected, the remote user is logged into the FTP root
directory.
3.6.2

FTP with Removable Flash Devices

All removable flash devices remote-FTP users as directories off the FTP root directory. Computer Flash card
partitions display as directories such as \SDMemory and USB Flash Keys display as directories such as \Hard Disk.
Full access privileges are granted for the client in these folders/devices.
Removable flash device directories are captured when a session is opened and are not changed while the session exists.
If you start without an installed SD Card, close your session and log on again to view the SD Card directory. If the SD Card
existed when you logged on, and is removed and inserted, it will still work, provided the SD Card's device name did not
change during reinsertion.
Software
For public disclosure
unit supports standard (RFC 959). It does not
+
Setup Tool. By default, the server is not enabled. Once enabled, a
+
must be restarted before changes take effect.
+
as \, and is the root of the flash device.
+
GFK-2847W 27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents