Battery Installation And Replacement - GE QuickPanel+ IC755CxS06RDx User Manual

5.6

Battery Installation and Replacement

Warning
Warning
Caution
Attention
Mounting and Installation
For public disclosure
Batteries may present a risk of fire, explosion, or chemical burn if mistreated. Do
not crush, disassemble, short-circuit, or dispose of in fire.
Use of batteries not specified for use with the QuickPanel
risk of fire or explosion.
Do not recharge, disassemble, heat or incinerate lithium batteries.
Dispose of lithium batteries in accordance with federal, state, and local regulations.
Be sure to consult with the appropriate regulatory agencies before disposing of
batteries.
1) Replacing the battery should only be performed by trained personnel and in
a non-hazardous location.
2) If the QuickPanel Operator Interface is VESA mounted, detach from the VESA
+
arm when replacing the battery.
3) The battery should only be replaced when the unit is powered off.
4) Care should be taken to protect and insert the battery with correct polarity.
5) Do not use any metallic item to remove the battery (such as screwdrivers,
knives, pliers, and so forth).
6) Be careful to not drop the battery or any associated screws into the unit.
7) Be careful of edges on internal sides of the enclosure and frame.
The PC controller does not start automatically when the battery is replaced in
QuickPanel Operator Interface. After battery replacement, start the controller
+
using the #Command in the Proficy Machine Edition (PME) runtime.
product may present a
+
GFK-2847W 69