Initial Configuration; 4.4 Runtime Setup - GE QuickPanel+ IC755CxS06RDx User Manual

4.3.2

Initial Configuration

Perform the following procedure during initial startup.
➢ To configure the QuickPanel
1. Tap Start , point to Settings, then tap Control Panel.
2. Configure the system clock.
3. From the Control Panel, double-tap System to configure a Network Device Name. Many applications, including Proficy
Historian, require a unique Device Name.
Attention
4. From the Control Panel, double-tap Network and Dial-up Connections to configure network settings.
5. Run the Backup Utility

4.4 Runtime Setup

To download an application to a QuickPanel
development workstation. Refer to the section,
the PME online help, Downloading a Machine Edition Project.
Pre-installation Checks
For public disclosure
display
+
It is recommended to set a unique Device Name for the QuickPanel
future conflicts.
to save the settings.
Operator Interface, set up a data link between the unit and the
+
Ethernet for IC755CxS06RDx, IC755CxWxxCDx and
From the
Date and Time
to avoid
+
IC755CxSxxCDx, and
GFK-2847W 59